Diagnosis Introduction / Troubleshooting Strategy

INTRODUCTION
The manual transaxle can exhibit any of the following symptoms: noise or vibration is generated, oil leaks, shifting gears is hard or troublesome, or the transaxle jumps out of gear.


1. Gather information from the customer.
2. Verify that the condition described by the customer exists.
3. Find the malfunction by following the Inspection Chart for Trouble Symptoms.
4. Verify malfunction is eliminated.



TROUBLESHOOTING STRATEGY
Use these steps to plan your diagnostic strategy.

If you follow them carefully, you will be sure that you have exhausted most of the possible ways to find a manual transaxle fault.

The causes of these symptoms could come from: incorrect mounting, the oil level may be low, or a component of the transaxle may be faulty.