Headlamp Unit Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove screws attaching headlamp module to upper crossmember.
3. Remove headlamp module from vehicle.
4. Disconnect wire connectors from back of headlamp module.

Fig.13 Headlamp Module:

5. Remove headlamp module.

INSTALLATION

CAUTION: Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.

1. Connect wire connectors to the back of head-lamp module.
2. Place headlamp module in position.
3. Install screws attaching headlamp module to upper crossmember.
4. Connect battery negative cable.