Disassembly and Assembly

DISASSEMBLY
The radiator fan assembly consist of the following three components: fan, fan motor, and shroud.

FAN
There are no repairs to be made to the fan. If the fan is warped, cracked, or otherwise damaged, it must be replaced with only the recommended part for adequate strength, performance and safety.
1. Remove radiator fan assembly.





2. Remove fan hub retaining nut.
3. Remove fan from motor shaft.

FAN MOTOR
1. Remove radiator fan assembly.
2. Remove fan from motor shaft.





3. Remove screw attaching the in-rush current suppressor.
4. Remove screws attaching motor to shroud.
5. Remove the fan motor.

SHROUD
1. Remove radiator fan assembly.
2. Remove the FAN.
3. Remove the FAN MOTOR.

ASSEMBLY

FAN
There are no repairs to be made to the fan. If the fan is warped, cracked, or otherwise damaged, it must be replaced with only the recommended part for adequate strength, performance and safety.
1. Install fan on motor shaft.
2. Install fan retaining nut and tighten to 3.8 Nm (34 inch lbs.)).
3. Install radiator fan assembly.

FAN MOTOR
1. Install the fan motor on shroud and tighten screws to 3.8 Nm (34 inch lbs.).
2. Install screw attaching the in-rush current suppressor and tighten to 2.6 Nm (23 inch lbs.).
3. Install the fan on motor shaft.
4. Install the radiator fan assembly.

SHROUD
1. Install the FAN MOTOR.
2. Install the FAN.
3. Install the radiator fan assembly.