Right SIACM Loss of Ignition Run/Start (Active)

Test 1:

SYMPTOM
RIGHT SIACM, LOSS OF IGNITION RUN-START - ACTIVE

TEST NOTE
This symptom is diagnosed using the test RIGHT SIACM ACCELEROMETER 1-ACTIVE.

WHEN MONITORED
With the ignition in the run/start position the ORC monitors the Fused Ignition Switch Output Run-Start circuit for proper system voltage. This is an active trouble code only.


SET CONDITION
If the voltage on the Fused Ignition Switch Output Run-Start circuit is below approximately 4.0 volts, the code will set.

POSSIBLE CAUSES
- Right side impact airbag control module, active/stored code