ACM Not Configured For SAB (Active)

Tests 1 - 2:

Test 3:

SYMPTOM
ACM NOT CONFIGURED FOR SAB - ACTIVE

WHEN MONITORED
With ignition ON, the ORC monitors the PCI Bus for the VIN message containing "A", "E" or "H" in the 4 the position of the VIN. This character identifies the type of safety equipment and should match the VIN. The PCM transmits the VIN every 13.76 seconds

SET CONDITION
The code will set, if the ORC detects a Side Impact Airbag Module on the PCI Bus and a VIN message containing an "E" or "H" as the 4 th character.

POSSIBLE CAUSES
- PCM, PCI communication failure
- Check PCM VIN
- ACM not configured for side airbags