Wiper Blade Replacement

REMOVAL
1. Turn wiper switch ON, position blades to a convenient place on the windshield by turning the ignition switch ON and OFF. Turn ignition switch OFF, when blade is in the desirable position.
2. Lift wiper arm to raise blade off glass.

Wiper Blade And Element:

Remove Blade From Arm:

3. Remove blade assembly from arm by pushing release tab under arm tip and slide blade away from arm tip.

Wiper Blade - Typical:

4. The driver's side wiper blade has a air foil on it and the air foil points downward as above.
5. Gently place wiper arm tip on windshield.

INSTALLATION
For installation reverse the above procedures. When complete turn ignition switch ON. Turn wiper switch OFF allowing the wiper blades PARK, then turn ignition switch OFF.