Parking Light Bulb: Service and Repair

REMOVAL
1. Release hood latch and open hood.
2. Remove screws attaching headlamp module to radiator closure panel.
3. Remove headlamp module from radiator closure panel.
4. Rotate socket counterclockwise one quarter turn.

Park And Turn Signal Lamp Bulb:

Park And Turn Signal Lamp Bulb Removal:

5. Pull socket from back of lamp.
6. Pull bulb from socket.

INSTALLATION
1. Place bulb into socket.
2. Push socket into back of lamp.
3. Rotate socket clockwise one quarter turn.
4. Install headlamp module from radiator closure panel.
5. Install screws attaching headlamp module to radiator closure panel.
6. Close hood,
7. Verify proper headlamp alignment.