Folding Rear Seat Back Pivot Bracket

FOLDING REAR SEAT BACK PIVOT BRACKET

REMOVAL

1. Remove rear seat cushion.
2. Remove side bolsters.
3. Remove rear seat back

Fig. 15:

4. Locate and remove the bolts attaching pivot bracket (Fig. 15).
5. Remove pivot bracket from vehicle.

INSTALLATION

1. Place pivot bracket into body by sliding tab into the slot at each end of the pivot bracket base.
2. Install pivot bracket attaching bolts.
3. Install rear seat back.
4. Install side bolsters.
5. Install rear seat cushion.