Folding Rear Seat Back

FOLDING REAR SEAT BACK

NOTE: Fabric covered cushions are serviced as an assembly.

REMOVAL

1. Remove rear seat cushion.
2. Remove side bolsters.

Fig. 15:

3. Remove pivot-bolts attaching folding rear seat back to lower pivot brackets (Fig. 15).
4. Release folding rear seat back latch.
5. Remove seat back from vehicle.

INSTALLATION

1. Position seat back in vehicle.
2. Engage folding rear seat back latch.
3. Install pivot-bolts attaching folding rear seat back to lower pivot brackets.
4. Install side bolsters.
5. Install rear seat cushion.