Quarter Panel Trim

UPPER QUARTER TRIM

REMOVAL

1. Remove rear seat cushion.
2. Remove bolt attaching rear seat belt anchor to floor.

Fig. 68:

3. Disengage clips attaching upper quarter trim to inner quarter panel (Fig. 68).
4. Route seat belt webbing through access hole in upper quarter trim.
5. Remove upper quarter trim panel from vehicle.

INSTALLATION

1. Place upper quarter trim panel into position.
2. Route seat belt webbing through access hole in upper quarter trim.
3. Engage clips attaching upper quarter trim to inner quarter panel.
4. Install bolt attaching rear seat belt anchor to floor.
5. Install rear seat cushion.