Left Front Wheelhouse Splash Shield

LEFT FRONT WHEELHOUSE SPLASH SHIELD

REMOVAL

1. Hoist and support vehicle on safety stands.
2. Remove left front wheel.
3. Remove battery splash shield.

Fig. 23:

4. Remove screws attaching wheel house splash shield to front fender lip (Fig. 23).
5. Remove push-in fastener attaching wheel house splash shield to fender at the rocker panel.
6. Remove push-in fasteners attaching wheel house splash shield to fender support.
7. Remove wheel house splash shield from vehicle.

INSTALLATION

1. Place wheel house splash shield into position.
2. Install push-in fasteners attaching wheel house splash shield to fender support.
3. Install push-in fastener attaching wheel house splash shield to fender at the rocker panel.
4. Install screws attaching wheel house splash shield to front fender lip.
5. Install battery splash shield.
6. Install left front wheel and tighten to the proper lug nut tightening procedures.
7. Remove vehicle from hoist.