Front Door Window Glass: Service and Repair

FRONT DOOR GLASS

REMOVAL

1. Remove door trim panel and inner belt weatherstrip.
2. Connect power window switch or install crank and lower window to 50 mm (2 in.) from bottom of travel.
3. Loosen screws holding regulator roller channel to glass.
4. Slide roller channel rearward to allow screw heads to pass through key hole slots in channel.
5. Separate glass from roller channel.

Fig. 40:

6. Raise glass upward and out of the opening at top of door (Fig. 40).

INSTALLATION

1. Lower glass down and in the opening at top of door.
2. Position glass on roller channel.
3. Slide roller channel forward to allow screw heads to engage key hole slots in channel.
4. Tighten screws holding regulator roller channel to glass.
5. Install door trim panel and inner belt weatherstrip.