Front Seat Back Cover

FRONT SEAT BACK COVER

REMOVAL

1. Remove seat from vehicle.
2. Remove head restraint.
3. Remove front seat back.
4. Disengage the J-strap retainer.

Fig. 4:

5. Roll cover upward to hog rings. Cut hog rings to free cover (Fig. 4).
6. Roll cover to top of seat back and remove head restraint sleeve guides.
7. Remove cover from seat back.

INSTALLATION

NOTE: Do not reuse the recliner assembly attaching bolts.

1. Position cover at the top of seat back.
2. Carefully roll cover down to the area that hog rings are to be installed.
3. Install hog rings.
4. Roll cover downward.
5. Engage the J-strap retainer
6. Install new head restraint sleeve guides.
7. Install seat back to seat cushion. Tighten bolts to 40 N.m (30 ft.lbs.) torque.
8. Install seat in vehicle.
9. Install head restraint.
10. Check seat back and headrest operation.