No PCI Transmission (Active)

Test 1:

SYMPTOM
NO PCI TRANSMISSION (ACTIVE)

TEST NOTE
All symptoms listed above are diagnosed using the same tests. The title for the tests will be ACM ACCELEROMETER (ACTIVE).

WHEN MONITORED
With the ignition in the ON position and the ACM transmitting information on the PCI BUS.

SET CONDITION
The code will set if the ACM cannot detect the ACM transmitting information on the PCI BUS for 5 consecutive seconds. NOTE: Any PCI Bus Failure will cause this code to set.

POSSIBLE CAUSES
- ACM, active/stored code