Harsh Engagement From Neutral to Drive

Symptom:
* HARSH ENGAGEMENT FROM NEUTRAL TO DRIVE

POSSIBLE CAUSES
HIGH DRIVELINE BACKLASH
QUICK LEARN PERFORMED FIRST
SQUEAKY EXHAUST DONUT
UD CLUTCH CLEARANCE TOO LOW
DEFECTIVE ENGINE MOUNTS
ENGINE IDLE SPEED TOO HIGH (CHECK AIS MOTOR)
STICKY THROTTLE POSITION SENSOR

Repair Instructions:
HIGH DRIVELINE BACKLASH
Check and/or replace axle shafts, transfer gears/chain, differential pinion shaft/gears, hubs, and hub nuts.
Perform Transaxle 41 TE/AE Verification TEST VER-1A Verification Tests

QUICK LEARN PERFORMED FIRST
Perform Quick Learn procedure.
Perform Transaxle 41 TE/AE Verification TEST VER-1A Verification Tests

SQUEAKY EXHAUST DONUT
Replace Exhaust Donut.
Perform Transaxle 41 TE/AE Verification TEST VER-1A Verification Tests

UD CLUTCH CLEARANCE TOO LOW
Replace UD clutch Plates and discs, set clearance to specifications.
Perform Transaxle 41 TE/AE Verification TEST VER-1A Verification Tests

DEFECTIVE ENGINE MOUNTS
Repair or replace Engine Mounts.
Perform Transaxle 41 TE/AE Verification TEST VER-1A Verification Tests

ENGINE IDLE SPEED TOO HIGH (CHECK AIS MOTOR)
Refer to DRIVEABILITY DTCs, and perform CHECKING THE MINIMUM IDLE AIR FLOW to repair failure.
Perform Transaxle 41 TE/AE Verification TEST VER-1A Verification Tests

STICKY THROTTLE POSITION SENSOR
Refer to Symptoms List, THROTTLE POSITION SIGNAL.
Perform Transaxle 41 TE/AE Verification TEST VER-1A Verification Tests