No Response From BCM (BAT PWR Discon'd)

SYMPTOM
* NO RESPONSE FROM BCM (BAT PWR DISCON'D)

TEST NOTE: All symptoms listed above are diagnosed using the same tests. The title for the tests will be BATTERY POWER TO MODULE DISCONNECT.

POSSIBLE CAUSES
- BCM defect - fused IGN SW out
- Fused IGN SW out CKT SHRT to GND - BCM
- CCD BCM ground circuit open
- BCM defect
- Fuse # 11 defective
- No response IGN SW output voltage
- No response fused B+ volt low
- No response fused IGN output voltage