General

GEAR RATIO:
First Gear 2.69
Second Gear 1.55
Third Gear 1.00
Reverse 2.10

END PLAY:
Input Shaft 0.19 - 1.50 mm (0.008 - 0.060 inch)
Front Clutch Retainer 0.76 - 2.69 mm (0.030 - 0.106 inch)
Front Carrier 0.89 - 1.45 mm (0.007 - 0.057 inch)
Front Annulus Gear 0.09 - 0.50 mm (0.0035 - 0.0200 inch)
Planet Pinion 0.15 - 0.59 mm (0.006 - 0.023 inch)
Reverse Drum 0.76 - 3.36 mm (0.030 - 0.132 inch)

THRUST WASHERS:
Reaction Shaft Support (Phenolic) No. 1 1.55 - 1.60 mm (0.061 - 0.063 inch)
Rear Clutch Retainer (Phenolic) No. 2 1.55 - 1.60 mm (0.061 - 0.063 inch)

Output Shaft [1] (Select) No. 3:
Size 1 1.98 - 2.03 mm (0.077 - 0.080 inch)
Size 2 2.15 - 2.22 mm (0.085 - 0.087 inch)
Size 3 2.34 - 2.41 mm (0.092 - 0.095 inch)

Front Annulus [1] No. 4 2.95 - 3.05 mm (0.116 - 0.120 inch)
Front Carrier [1] No. 5, 6 1.22 - 1.28 mm (0.048 - 0.050 inch)
sun Gear (Front) No. 7 0.85 - 0.91 mm (0.033 - 0.036 inch)
Sun Gear (Rear) No. 8 0.85 - 0.91 mm (0.033 - 0.036 inch)
Rear Carrier [1] No. 9, 10 1.22 - 1.28 mm (0.048 - 0.050 inch)
Reverse Drum, Phenolic No. 11 1.55 - 1.60 mm (0.061 - 0.063 inch)

TAPERED ROLLER BEARING SETTINGS:
Output Shaft 0 - 0.7 Nm (0 - 0.0028 inch)
Transfer Shaft 0.05 - 0.25 mm (0.002 - 0.10 inch)
Differential 0.15 - 0.29 Nm (0.006 - 0.012 inch lbs.)

[1]: Steel Backed Bronze