Cruise Control Switch: Service and Repair

Speed Control Switch:

The speed control switches are mounted in the steering wheel and wired through the clock spring device under the airbag module.

WARNING: IF REMOVAL OF AIRBAG MODULE IS NECESSARY, REFER TO AIR BAGS AND SEAT BELTS/AIR BAGS.

REMOVAL
1. Turn off ignition.
2. Remove two screws from side of each switch.
3. Rock switch away from airbag and steering wheel.
4. Disconnect two-way electrical connector.
5. Repeat for the other switch.

INSTALLATION
1. Install switches.
2. Connect two-way electrical connector.
3. Install two screws to the side of each switch.
4. Install airbag, refer to the Restraint Systems