Headlamp Switch: Service and Repair

REMOVAL
1. Remove the steering column cover and liner.

Headlamp Switch:

2. Remove the three screws securing headlamp switch mounting plate to the instrument panel.
3. Pull the headlamp switch and mounting plate rearward from the instrument panel opening.
4. Disconnect both the nine way and the ground wiring connectors from the switch.
5. Remove the switch knob and shaft by:
a. Pulling knob rearward switch ON position.
b. Depress the button on the bottom of the switch to release the shaft.
6. Snap headlamp switch bezel out of mounting plate to gain access to the mounting plate retaining nut.
7. Remove the retaining nut using a Phillips Head screwdriver. Separate the switch from the mounting bracket.

INSTALLATION
- For installation, reverse the above procedures.