Blower Motor Resistor: Service and Repair

CAUTION: Stay clear of the blower motor and resistor block (Hot). Do not operate the blower motor with the resistor block removed.

REMOVAL
1. Remove windshield wipers.
2. Remove cowl top screen.
3. Disconnect the resistor block wiring connector.
4. Remove two resistor block retaining screws. The screw threads attaching the resistor block are not full length. It is necessary to gently pry out the resistor block while turning the screws counterclockwise enabling the threads to engages.
5. Remove resistor block from vehicle.

INSTALLATION
For installation, reverse the above procedures.