Temperature Control Cable Replacement

The Control Cable can be removed and installed without having to remove the instrument panel from the vehicle.

REMOVAL
1. Remove instrument panel upper cowl panel.

Bezel Removal:

2. Remove right side upper instrument panel bezel. Refer to: "Instrument Panel, Gauges and Warning Indicators : Instrument Panel : Service and Repair" Service and Repair

Instrument Panel Center Vent:

3. Remove center vent duct.

Instrument Panel Defrost Duct:

4. Remove upper defrost duct.

Instrument Panel Inner Defrost Duct:

5. Remove inner defrost duct.
6. Disconnect cable at heater unit.
7. Disconnect cable at control panel. Remove control from instrument panel.
8. Remove cable from vehicle.

INSTALLATION
- For installation, reverse the above procedures, adjust cable and test. See Temperature Control Cable Adjustment.