Amber ABS Warning Lamp

The amber ABS warning lamp is located on the lower left side of the instrument panel. The purpose of the warning lamp is discussed in detail below.

When the ignition key is turned to the ON position, the amber ABS warning lamp is lit until the Controller Antilock Brake(CAB) completes its self-tests and turns off the lamp (approximately 4 seconds). The amber ABS warning lamp will illuminate when the CAB detects a condition that results in the shutdown of ABS function. The CAB turns on the amber ABS warning lamp by grounding the circuit.

Under most conditions, when the amber ABS warning lamp is on, only the ABS function of the brake system is affected; the base brake system and the ability to stop the vehicle are not affected.