Sun Shade: Service and Repair

Fig. 1 Sunroof Components:

SUNROOF SUNSHADE

REMOVAL
1. Remove sunroof glass panel (4). Refer to procedure found in this section.
2. Slide sunshade (11) to full forward position.
3. Disengage slide blocks on one side of sunshade from sunshade guide (6).
4. Lift and pull sunshade out of opposite sunshade guide.


INSTALLATION
1. Place sunshade with cloth side down and install one side's slide blocks into the track on the sunshade guide (6).
2. Slide the other side's slide blocks to fully inward position and insert them into the sunshade guide (6).
3. Verify that all four slide blocks are fully engaged in the sunshade guide (6).
4. Slide sunshade (11) fully rearward.
5. Install sunroof glass panel (4).