Cast Wheel

Removal
1. Raise the vehicle so the tire and wheel assembly clears ground level.
2. Remove the 5 wheel nuts from the studs.
3. Remove the tire and wheel from the hub.

Installation

Fig. 2:

1. To install the wheel, first position it properly on the hub mounting surface using the hub pilot as a guide. Loosely install all 5 wheel nuts. All wheel nuts should then be tightened just snug. Progressively tighten them in the proper sequence. Tighten wheel nuts to 129 Nm (95 ft. lbs.). Never use oil or grease on studs or nuts.
2. Lower the vehicle.