Speedometer/Tachometer/Odometer/Transmission Range Indicator

REMOVAL

Mask/Lens Retaining Screw:

1. Remove mask/lens retaining screws and remove mask/lens.

Back Covering Retaining Screws:

2. Disconnect odometer/transmission range indicator connector from the printed circuit board.

Speedometer/Tachometer:

3. Remove screws attaching speedometer/tachometer to housing and remove.

Junction Block/BCM Location:

4. Remove screws attaching from the back of speedometer and remove the odometer/transmission range indicator display.

INSTALLATION
- For installation, reverse the above procedures.