Engine Mount

Bracket 61 Nm (45 ft. lbs.)
Torque Bracket
Front 33 Nm (24 ft. lbs.)
Rear:
A/T 110 Nm (80 ft. lbs.)
M/T 61 Nm (45 ft. lbs.)

BOLT TIGHTENING SEQUENCE
Front Mount:
a. If engine mount bracket was removed, tighten bolt 1 to 3 Nm (20 inch lbs.) and bolts 2, 3 and 4 to 108 Nm (80 ft. lbs.).
b. If engine mount bracket was removed, tighten bolts 5 and 1 to 54 Nm (40 ft. lbs.).
c. Tighten engine mount bracket to insulator assembly thru-bolt to 54 Nm (40 ft. lbs.).
d. Tighten insulator assembly nuts to the lower radiator crossmember torque to 54 Nm (40 ft. lbs.).
e. Install mass damper and tighten to 54 Nm (40 ft. lbs.).

Left Mount:
1. 55 Nm (40 ft. lbs.)
2. 108 Nm (80 ft. lbs.)

Right Mount:
Tighten engine mount to rail fasteners to 54 Nm (40 ft. lbs.), then tighten engine mount to engine bracket thru-bolt to 108 Nm (80 ft. lbs.).