Ignition Coil: Service and Repair

Fig.29 Electronic Ignition Coil Pack:

NOTE: The electronic ignition coil pack attaches to a bracket mounted on top of the cylinder head cover (Fig. 29).

REMOVAL
1. Disconnect electrical connector from coil pack.
2. Remove coil pack mounting nuts.
3. Remove coil.
4. Install coil pack on valve cover.
5. Transfer spark plug cables to new coil pack.
- The coil pack towers are numbered with the cylinder identification.

NOTE: Be sure the ignition cables snap onto the towers.

Ignition Coil Mounting Bolts 11 Nm (95 in lb)