B. Replace the Radiator Fan Relay

1. Locate the radiator fan relay on the left front inner frame rail just behind the radiator (Figure 3).

2. Disconnect the radiator fan relay wiring connector.

3. Remove and discard the radiator fan relay.

4. Install the new radiator fan relay. Tighten the fasteners to 45 in-lbs (5 N.m).

CAUTION:
Do not over torque screws. To ensure heat transfer and proper operation, the new radiator fan relay must be installed using both of the screws.

5. Connect the radiator fan relay electrical connector. Slide the red latch to the locked position.

6. Lower the vehicle.

7. Connect the negative battery cable.