With Antilock Brakes

CAUTION: Proportioning valves should never be disassembled.

REMOVE

Antilock Proportioning Valve (Left Side Shown):

1. Remove the chassis brake tube nuts from the proportioning valve controlling the rear wheel of the vehicle which has premature wheel skid.
2. Remove the proportioning valve from the chassis brake tube.

INSTALL
1. Install the proportioning valve in the chassis brake tube.
2. Tighten the 2 chassis brake tube nuts to a torque of 17 Nm (145 inch lbs.) torque.
3. Bleed the affected brake line.