Flushness

FLUSHNESS

1. Position sunshade in full rearward position.
2. To adjust front of glass;

a. Loosen front and middle glass attachment screws
b. Adjust front of sunroof glass panel so that the corners are flush to 1.0 mm below the top surface of the roof panel.
c. Tighten all glass attachment screws.

3. To adjust rear of glass;

a. Loosen rear and middle glass attachment screws
b. Adjust rear of sunroof glass panel so that the corners are flush to ± 1.0 mm off the top surface of the roof panel.
c. Tighten all glass attachment screws.