Lighting and Horns: Application and ID

GENERAL INFORMATION
The following Bulb Application Tables lists the lamp title on the left side of the column and trade number or part number on the right.

CAUTION:
- Do not use bulbs that have a higher candle power than the bulb listed in the Bulb Application Table. Damage to lamp can result.
- Do not touch halogen bulbs with fingers or other oily surfaces. Bulb life will be reduced.

SPECIFICATIONS
EXTERIOR LAMPS
Back-up = 921
Center High Mounted Stop = 921
Fog = 9006
Headlamp = 9007
License Plate = 168
Park/Turn Signal = 3157NA
Tail - DH/DP/PH = 916
Stop/Turn Signal - DH/DP/PH = 3157
Tail/Stop/Turn Signal - CH = 3057

INTERIOR LAMPS
Dimmer Controlled Lamps
Some components have lamps that can only be serviced by a Authorized Service Center (ASC) after the component is removed from the vehicle. Contact local dealer for location of nearest ASC.
A/C Heater Control = 37
A/C Heater ISO Symbols = LED
Ash Receiver = 37
A/C Heater Control = 37
Instrument Cluster = PC 194
Radio = ASC

Indicator Lamps
A/C Compressor = LED
Air Bag = PC 194
Anti-lock Brake = PC 194
Brake Warning = PC 194
Check Engine = PC194
Console Shift Indicator = LED
Engine Oil Pressure = PC 194
Engine Temperature = PC 194
Fog Lamp = PC161
Generator = PC 194
High Beam = PC194
Low Fuel = PC 194
Rear Window Defogger = LED
Seat Belt = PC 194
Security Alarm = LED
Shift Indicator = VF Display
Speed Control = PC 194
Turn Signal = PC 194

Non-Dimming Lamps
Some components have lamps that can only be serviced by an Authorized Service Center (ASC) after the component is removed from the vehicle. Contact local dealer for location of nearest ASC.
Dome Courtesy = 578
Ignition Lock = Mopar
Reading Lamp = 906
Trunk = 906
Visor Vanity = 6501966