Mirrors: Service and Repair

Mirror/Reading Lamps:

INSIDE MIRROR/READING LAMPS ASSEMBLY
REMOVAL
1. Disconnect wiring connector.
2. Loosen mirror set screw.
3. Lift mirror from mounting button.

INSTALLATION
- For installation, reverse the above procedure. Ensure the mirror is fully locked into place.

INSIDE MIRROR/READING LAMPS BULB/LENS
REMOVAL
1. Using a small thin blade tool, pry at the center of the lens nearest the mirror to remove lens.
2. Remove cartridge lamp and replace if necessary

INSTALLATION
- Install lens by setting lens into position and applying pressure until it is locked into position.