Sun Shade: Service and Repair

NOTE: The numbered call-outs in the following service procedures refer the numbered parts found in the exploded view diagram.

REMOVAL
1. Remove sunroof glass panel (4). Refer to procedure found in Sunroof/Service and Repair.
2. Slide sunshade (11) to full forward position.
3. Disengage slide blocks on one side of sunshade from sunshade guide (6).
4. Lift and pull sunshade out of opposite sunshade guide.

INSTALLATION
1. Place sunshade with cloth side down and install one side's slide blocks into the track on the sunshade guide (6).
2. Slide the other side's slide blocks to fully inward position and insert them into the sunshade guide (6).
3. Verify that all four slide blocks are fully engaged in the sunshade guide (6).
4. Slide sunshade (11) fully rearward.
5. Install sunroof glass panel (4). Refer to procedure found in Sunroof/Service and Repair.