Sunroof / Moonroof: Service and Repair

NOTE: The numbered call-outs in the following service procedures refer the numbered parts found in the exploded view diagram.

SUNROOF MODULE
Removal
1. Remove headlining.
2. Remove fasteners attaching sunroof module to vehicle roof and support braces.
3. With the aid of a helper, separate sunroof module from roof.
4. Remove sunroof module from vehicle.

Installation
1. With the aid of a helper, position sunroof module in vehicle.
2. Install fasteners holding sunroof module to vehicle roof.
3. Tighten all fasteners, starting from the front and working rearward and then the motor bracket.
4. Adjust glass panel for flushness to roof. Refer to glass adjustment procedure.
5. Install headlining.
6. Verify correct operation.

SUNROOF GLASS PANEL
Removal
1. Position sunroof sunshade (4) in full rearward position.
2. Remove six glass attachment screws.
3. Push glass panel upward from underside until glass panel clears the roof panel.
4. Lift glass panel from vehicle.

Installation
1. Position glass panel (4) in opening in vehicle roof.
2. Install, but do not tighten, glass attachment screws.
3. With the aid of a helper, hold the glass panel in position and tighten glass attachment screws.
4. Verify the correct glass height. Refer to Glass Height Adjustment procedure.