System Specifications

TIGHTENING TORQUE SPECIFICATIONS:

Accelerator cable adjustment bolts 4 ft.lbs. (5 Nm)
Air bypass valve (hose clamp) 3 ft.lbs. (4 Nm)
Air hoses (hose clamps) 3 ft.lbs. (4 Nm)
Air pipe mounting bolts] 9 - 11 ft.lbs. (12 - 15 Nm)
Drain plug 10 - 15 ft.lbs. (13 - 20 Nm)
Drain plug (ID"7") 12 - 19 ft.lbs. (17 - 26 Nm)
Fuel filter line to fuel filter (eye bolt) 22 ft.lbs. (30 Nm)
Fuel pressure regulator installation bolts 7 ft.lbs. (9 Nm)
Fuel rail cross-over pipe installation bolts 7 - 9 ft.lbs. (10 - 13 Nm)
Fuel rail installation bolts 7 - 9 ft.lbs. (10 - 13 Nm)
High pressure hose to fuel filter 22 ft.lbs. (30 Nm)
High pressure hose to fuel rail 4 ft.lbs. (5 Nm)
High pressure hose to fuel pump 25 ft.lbs. (35 Nm)
Intercooler to body 7 - 9 ft.lbs. (10 - 13 Nm)
Main pipe to fuel filter line 25 ft.lbs. (35 Nm)
Main pipe to high pressure hose 22 ft.lbs. (30 Nm)
Oil pipe to engine 12 ft.lbs. (17 Nm)
Oil pipe to turbocharger (front turbo) 12 ft.lbs. (17 Nm)
Oil pipe to turbocharger rear turbo 14 ft.lbs. (20 Nm)
Oil return pipe 7 ft.lbs. (9 Nm)
Throttle body to surge tank bolts 7 - 9 ft.lbs. (10 - 13 Nm)
TPS mounting screws 1.5 ft.lbs. (2.0 Nm)
Wastegate actuator 7 ft.lbs. (10 Nm)
Water pipe mounting bolts 7 ft.lbs. (10 Nm)
Water pipe eye bolts 22 ft.lbs. (31 Nm)