3 Speed Automatic

1. Disconnect battery ground cable.
2. Remove lower steering column cover and liner.
3. Lift top cover and cluster bezel until clips disengage to provide clearance.
4. Place ignition in On position.
5. Insert a screwdriver into access hole in lower shroud and depress cylinder button while rotating cylinder to disengage it from column.
6. Remove upper and lower shrouds.
7. Disconnect interlock cable from interlock assembly.
8. Remove interlock assembly mounting screws, then assembly.
9. Reverse procedure to install. Torque interlock assembly mounting screws to 21 inch lbs.