Transmission Speed Sensor: Testing and Inspection

INPUT (TURBINE) SPEED SENSOR INSPECTION
1. Disconnect the input speed sensor connector.
2. Measure the resistance between the input speed sensor side connector terminals 1 and 2.

Standard value: 0.3k - 1.2k ohms

3. If the resistance is outside the standard value, replace the input speed sensor.






OUTPUT SPEED SENSOR INSPECTION
1. Disconnect the output speed sensor connector.
2. Measure the resistance between the input speed sensor side connector terminals I and 2.

Standard value: 0.3k - 1.2k ohms

3. If the resistance is outside the standard value, replace the output speed sensor.