Evaporative Emission Control Canister: Service and Repair

Evaporative Canister Location (Typical):

REMOVAL

1. Remove fuel tubes and vacuum hoses from canister.
2. Remove canister bracket to body bolts. One bolt must be removed from over right front tire.
3. Remove canister and bracket from body.
4. Remove canister to bracket bolt and remove canister from bracket.

INSTALLATION

1. Position canister in mounting bracket.
2. Install canister bolt and tighten to 10 Nm (95 in-lbs).
3. Position canister and bracket to body and install bolts.
4. Tighten bolts to 10 Nm (95 in-lbs).
5. Install fuel tubes and vacuum hoses on canister.