Top Frame Removal

1. Remove rear seat cushion and back.
2. Remove quarter trim panels.
3. Disengage convertible top header latches.
4. From in luggage compartment, remove nuts and bolts holding tack strip to deck and quarter panels. Lift sling well upward to gain access to fasteners.
5. Separate sling well from seat back reinforcement and wire hangers.
6. Lower convertible top.
7. Remove bolts holding top frame to quarter panel mounting supports.
8. Disconnect upper top lift assist cylinder mounting.
9. Separate top frame from vehicle.
10. Reverse the preceding operation. Align top to achieve proper sealing at roof rail and header weatherstrips.