Slips In Reverse Only

1. Low hydraulic pressure.
2. Low-reverse band adjustment.
3. Defective or leaking valve body.
4. Low-reverse servo, band or linkage malfunction.
5. Low fluid level.
6. Incorrect gearshift linkage adjustment.
7. Faulty oil pump.
8. Aerated fluid.
9. Worn or damaged reaction shaft seal rings.
10. Worn or faulty front clutch.
11. Overrunning clutch inner race damaged.
12. Rear clutch dragging.
13. Worn or faulty rear clutch.
14. Faulty cooling system.
15. Kickdown band adjustment too tight.
16. High hydraulic pressure.
17. Governor malfunction.