Automatic Transmission/Transaxle: Technical Service Bulletins

• Recalls
  • Recall - Transaxle Ring Gear to Carrier Bolts May Break
• Customer Interest
  • A/T Transfer Gear - Whine or Whistle Type Noise
  • A/T - Slips In Reverse At Low Temperature
  • A/T - Harsh 1-2/2-3 Upshifts and 3-2 Kickdown
• All Technical Service Bulletins
  • A/T - Choosing the Right ATF
  • A/T - Math Part II
  • A/T - Twenty Steps To Successful Repairs
  • A/T - Math Formulas Part I
    • Overview
    • Shift Speed and Pressure
    • Speedometer Ratios
  • A/T - Front Bushing Wear
  • A/T - Slipping or No-Shift/Metal Sealing Rings
  • A/T - Drive Axle and Wheel Lug Nut Torque Specifications
  • A/T - Failsafe Modes
  • A/T - Intermittent Electrical Problems
  • A/T - How To Use A Pressure Gauge
  • A/T - Engine Vacuum Testing
  • A/T Transfer Gear - Whine or Whistle Type Noise
  • Automatic Transmission - Gear Selection Revised
  • A/T - Slips In Reverse At Low Temperature
  • Automatic Transmission Fluid - Recommendation
  • A/T - ATF+4 Fluid Usage/Applications
  • A/T - Harsh 1-2/2-3 Upshifts and 3-2 Kickdown
  • Recall - Transaxle Ring Gear to Carrier Bolts May Break
  • A/T Pan Gasket - Reusable Design/Installation
    • Overview
    • Installation Procedure
  • A/T - ATF + 4 Fluid Usage