Rollover Valve: Service and Repair

REMOVAL

Pressure Relief/Roll Over Valve:

1. Fuel system pressure must be released prior to service. Service and Repair
2. Fuel tank must be removed from vehicle prior to service.
3. Slide the blade of a screwdriver between the rubber mounting grommet and the fuel tank, making sure not to slide the screwdriver between the roll-over valve and grommet. Use a second screwdriver to brace the first and pry the roll-over valve out of the tank.
4. Remove the grommet from the valve, and make sure there is no damage or wear evident on the grommet. If grommet is worn it must be replaced.




INSTALLATION

Pressure Relief/Rollover Valve:

1. Install the rubber grommet into the fuel tank, and seat it around the curled lip of the tank.
2. Lubricate the grommet with power steering fluid, and push roll-over valve into grommet until properly seated. Twist grommet if necessary to align to correct position.
3. Reinstall fuel tank.