Removal

REMOVAL

Special Tools:










1. Remove axle bolts (1) from axle flange (2).





2. Remove axle shaft (1) from axle.





3. With Socket (1) remove hub nut with integrated lock washer from hub (2) spindle.





4. Install hub/rotor Guide (1) into hub spindle (2).





5. Slide hub/rotor (1) with bearings off hub spindle and hub/rotor Guide (2).





6. Remove outer bearing (1) from hub (2).





7. Remove hub seal (1) from the back of the hub (2) with seal puller.





8. Remove inner bearing (1) from hub (2).





9. Remove outer bearing cup (1) from hub (2) with a hammer and brass drift.





10. Remove inner bearing cup (1) from hub (2) with hammer and brass drift.