Axle Shaft Seal - Removal

REMOVAL

Special Tools:










1. Remove hub bearings and axle shafts.
2. Remove differential from differential housing (2).
3. Remove differential bearing adjusters (1).





4. Remove axle seals (2) located behind adjusters with Receiver and Extractor.





5. Install Receiver (1) into the adjuster bore.
6. Install Extractor Rod with Extractor Foot (2) through the receiver and axle seal.





7. Install Extractor Plate and Nut (2) on the extractor rod (1).
8. Tighten nut (2) on extractor rod (1) to pull seal into the receiver.