Front

FRONT

Special Tools:










1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the brake caliper, caliper adapter and rotor, Brake Rotor - Removal.
4. Remove the wheel speed sensor from the hub.

NOTE: After the wheel stud is pressed from the flange, the axle shaft will not turn past the hub/bearing retaining bolt end. Before pressing the wheel stud from the flange, rotate the axle shaft so the stud that needs replacement is aligned with the wheel speed sensor opening.

5. Press the stud from the hub using remover (1).





6. Remove the stud (2) from the hub (1) through the backing plate access hole (3).