Link And Coil Front Suspension

INSTALLATION






NOTE: Discard the nuts and bolts and do not reuse. New nuts and bolts should be used when replacing or servicing the control arms.

1. Position the lower control arm (2) at the axle bracket (3) and frame rail bracket (1).
2. Install the rear bolt and finger tighten the nut.





3. Install the cam bolt (1), cam and nut in the axle and align the reference marks.
4. Remove support and lower the vehicle.
5. Tighten cam nut at the axle bracket and the rear nut at the frame bracket to specifications. Front Suspension Specifications