Link And Coil

INSTALLATION





1. Position the steering gear (1) the frame rail. install the three mounting bolts (2), and tighten to 196 Nm (145 ft. lbs.).










2. Align steering coupler (1) on gear shaft (2). Install pinch bolt and tighten to 49 Nm (36 ft. lbs.) torque.










3. Align and install the pitman arm (5) Pitman Arm - Installation.
4. Install the washer and retaining nut (4) on the pitman shaft. Tighten the nut to 305 Nm (225 ft. lbs.).
5. Connect fluid hoses to steering gear Power Steering Hose - Installation , tighten to 32 Nm (23 ft. lbs.).
6. Add fluid, Procedures.
7. Reset the toe and center the steering wheel Service and Repair