Lower

LOWER





1. Position the lower shroud (4) over the steering column tilt lever and align on the steering column.

NOTE: If the vehicle is equipped with an automatic transmission, be certain to engage the gearshift lever boot into the opening in both shroud halves.

2. Position the upper shroud (1) onto the steering column over the lower shroud (4).
3. Align the snap features on the upper and lower shroud halves (1, 4) and apply hand pressure to snap together.
4. From below the steering column, install the two outboard screws within the recess areas (2) that secure the upper shroud (1) to the lower shroud (4).





5. Install the lower shroud to column retaining screw (3).
6. Install the steering column opening cover, Steering Column Opening Cover - Installation.