Seat Belt Retractor - Description

DESCRIPTION





The seat belt retractors (1) used in all seating positions include an inertia-type, emergency locking mechanism as standard equipment. However, the retractor locking mechanisms for all seating positions except the driver side front position are mechanically switchable from an Emergency Locking Retractor (ELR) to an Automatic Locking Retractor (ALR). The primary function of this feature is to securely accommodate a child seat in any seating position of the vehicle without the need for a self-cinching seat belt tip half latch plate unit or another supplemental device that would be required to prevent the seat belt webbing from unwinding freely from the retractor spool of an inertia-type emergency locking retractor mechanism.

The emergency and automatic locking mechanisms are integral to the seat belt and retractor unit and are concealed beneath a molded plastic cover (2) located on one side of the retractor spool. These locking mechanisms cannot be adjusted or repaired and, if ineffective or damaged, the entire seat belt and retractor unit must be replaced.