Defroster Duct - Removal

REMOVAL

WARNING: Disable the airbag system before attempting any steering wheel, steering column or instrument panel component diagnosis or service. Disconnect and isolate the negative battery (ground) cable and wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to follow these instructions may result in accidental airbag deployment and possible serious or fatal injury.

NOTE: Take the proper precautions to protect the instrument panel from cosmetic damage.





1. Remove the instrument panel and place it on a workbench Instrument Panel - Removal.
2. Remove the instrument panel cover Instrument Panel Cover - Removal.
3. Remove the instrument panel ducts and place the center distribution duct on a workbench Instrument Panel Duct - Removal.
4. Remove the three retainers (3 and 4) that secure the defroster duct (1) to the center distribution duct (2) and remove the defroster duct.